Moze ktos mi pomoc zdiagnozowac te bledy :
Address 01: Engine Labels: Redir Fail!
Part No SW: 4F0 910 401 N HW: 4F0 907 401 B
Component: 3.0L V6TDI G000AG 0030
Revision: --H01--- Serial number:
Coding: 0011372
Shop #: WSC 02334 785 00200
3 Faults Found
005495 - Right Engine Mount Solenoid Valve (N145): Open Circuit
P1577 - 001 - Upper Limit Exceeded
Freeze Frame:
Fault Status: 01110001
Fault Priority: 0
Fault Frequency: 106
Mileage: 128476 km
Time Indication: 0
Date: 2009.05.30
Time: 18:09:53
Freeze Frame:
RPM: 798 /min
Torque: 50.7 Nm
Speed: 0.0 km/h
Voltage: 11.70 V
Bin. Bits: 0
Bin. Bits: 0
Bin. Bits: 0
005491 - Left Engine Mount Solenoid Valve (N144): Open Circuit
P1573 - 001 - Upper Limit Exceeded
Freeze Frame:
Fault Status: 01110001
Fault Priority: 0
Fault Frequency: 1
Mileage: 128476 km
Time Indication: 0
Date: 2009.05.30
Time: 18:09:53
Freeze Frame:
RPM: 798 /min
Torque: 50.7 Nm
Speed: 0.0 km/h
Voltage: 11.70 V
Bin. Bits: 0
Bin. Bits: 0
Bin. Bits: 0
005659 - Glowplug for Cylinder 2 (Q11): Open Circuit
P161B - 001 - Upper Limit Exceeded
Freeze Frame:
Fault Status: 01110001
Fault Priority: 0
Fault Frequency: 1
Mileage: 128496 km
Time Indication: 0
Date: 2009.05.31
Time: 09:51:25
Freeze Frame:
RPM: 819 /min
Torque: 97.5 Nm
Speed: 0.0 km/h
Duty Cycle: 1.0 %
Voltage: 13.53 V
Duty Cycle: 24.1 %
Temperature: 25.2°C
Readiness: 0 0 0 0 0
Wyglada mi na bledy zwiazane z poduszkami silnika i chyba nie grzeje swieca na 2gim cylindrze.
Wiecie moze o co chodzi z tymi poduszkami ? Moge sie jakos dowiedziec czegos wiecej z vag-com, jestem poczatkujacy - mocno
wszelkie poradowskazówki mile widziane
I co znaczy "Labels: Redir Fail!" ?
Pozdro !
<piwo>