.: AUDI KLUB POLSKA :.

Witam,

Po wymianie akumulatora nie dziala klima i domykanie szyb.
Wyskakuje blad:
00256 A/C pressure/tempetature sensor (G395)
002 lower limit exceeded intermittent

Dziwna sprawa ze przed wymiana klima dzialala bez dobrze.
Teraz nie chce sie wlaczyc wykasowanie bledu nie mozliwe wraca odrazu.
Czy uwalili czujnik podczas wymiany? Bo sam chyba nie padl czy moze cos trzeba zakodowac?
Acha podpowiedzcie prosze jak zakodowac te szyby.

Dzieki

Audi A8 (4E) Comfort System

Coding

* +0000001 = Alarm Setting: Great Britain/Ireland (10 Tamper Alarms - PR-B09)
* +0000002 = Lock Cylinder unlocks electrically (OFF = Unlocked Door only / ON = All doors)
* +0000004 = Selective Locking (PR-4K2/4K6/4K7)
* +0000008 = Anti-Theft Warning System installed (PR-7AH/7AL)
* +0000016 = Inclination Sensor installed (PR-7AL/7AN)
* +0000032 = Rear Lid Control Module installed (J605 - PR-4E7/4E9)
* +0000064 = Comfort Function via Remote active (PR-A8S+B0A/B0L/B1C/B1P)
* +0000128 = Right-Hand-Drive (PR-L0R)
* +0000512 = Rear Shades (PR-3Y2/3Y5/3Y8)
* +0001024 = Anti-Theft Warning System Confirmation via Horn (PR-A8U)
* +0002048 = SAE Rear Lights (PR-A8U)
* +0004096 = Footwell Lights (PR-QQ1/QQ3)
* +0008198 = No SAFE-Motors (PR-A8U)
* +0016384 = Fuel Cap Recognition active (PR-A8S)
* +0032768 = Interior Monitoring inactive/not installed (PR-7AL/7AH)

Note: Coding is the sum of the individual options. Not all options apply for all control moduls!
Adaptation
Channel 001-004: Personalization - Key 1-4

* +00001 = Passenger Door
* +00002 = Rear Left Door
* +00004 = Rear Right Door
* +00008 = Luggage Compartment
* +00016 = Drivers Door
* +00256 = Auto-Lock/Unlock
* +00512 = Comfort Opening: Front Window Regulators
* +01024 = Comfort Opening: Rear Window Regulators
* +02048 = Comfort Opening: Sunroof
* +04096 = Rear Shade automatic

Note: Adaptation value is the sum of the individual options.


Channel 014: Inclination Sensor Sensitivity

* 200 = 100% = 0.0°
* 180 = 90% = 0.1°
* 160 = 80% = 0.2°
* 140 = 70% = 0.3°
* 120 = 60% = 0.4°
* 100 = 50% = 0.5°


Channel 061: Comfort Functions

* +001 = Comfort Closing: Window Regulators via Remote Control
* +002 = Comfort Opening: Window Regulators via Remote Control
* +004 = Comfort Closing: Sunroof via Remote Control
* +008 = Comfort Opening: Sunroof via Remote Control
* +016 = Comfort Closing: Window Regulator via Switch Drivers Door
* +032 = Comfort Opening: Window Regulator via Switch Drivers Door
* +064 = Comfort Closing: Sunroof via Switch Drivers Door
* +128 = Comfort Opening: Sunroof via Switch Drivers Door
* +256 = Comfort Closing: Window Regulators via Lock Cylinder
* +512 = Comfort Closing: Sunroof via Lock Cylinder

Note: Adaptation value is the sum of the individual options.


Channel 062: Central Locking Functions

* +1 = Central Locking Closing Confirmation (Blink)
* +2 = Central Locking Opening Confirmation (Blink)
* +4 = Terminal 87 USA Logic