OK
Odczytałem jeszcze takie błędy w sterowniku:
Saturday,11,March,2017,14:51:05:04550
VCDS Version: Release 15.7.0 Running on Windows 7 x64
www.Ross-Tech.com Address 01: Engine Labels: Redir Fail!
Control Module Part Number: 038 997 016 K HW: 028 101 114 5
Component and/or Version: R4 2,0L EDC G000SG 0811
Software Coding: 0000072
Work Shop Code: WSC 75418 146 187109
VCID: 2657D63708E7F802451C70D-515E
3 Faults Found:
17056 - Cylinder 2 Glow Plug Circuit (Q11)
P0672 - 000 - Electrical Fault - Intermittent
Freeze Frame:
RPM: 0 /min
Torque: 0.0 Nm
Speed: 0.0 km/h
Load: 0.0 %
Voltage: 12.24 V
Bin. Bits: 00001111
Temperature: 21.6°C
Bin. Bits: 00110000
16618 - Boost Pressure Regulation
P0234 - 000 - Limit Exceeded (Overboost Condition)
Freeze Frame:
RPM: 2268 /min
Torque: 140.0 Nm
Speed: 96.0 km/h
Load: 34.1 %
Voltage: 14.14 V
Bin. Bits: 00001000
Absolute Pres.: 1570.8 mbar
Absolute Pres.: 2172.6 mbar
19527 - Reservoir for Additive for Particle Filter
P3071 - 000 - Empty - Intermittent
Freeze Frame:
RPM: 1512 /min
Torque: 122.0 Nm
Speed: 63.0 km/h
(no units): 1.0
Mileage: 60 km
(no units): 0.0
Readiness: 0 1 0 0 0